|
Home > Services > JetTracTM System
THE JET TRAC SYSTEM
Finally! A system that is cleaner and cheaper than abrasives
|
The omni-directional JetTracTM system is a revolutionary development in surface preparation technology. A high speed rotating UHP nozzle enclosed in a vacuum shroud is held in place by a powerful vacuum and a patented seal that allows complete removal of effluent water and paint debris. There is 100% containment at the nozzle, eliminating the need for expensive containment and minimizing the effect of surface preparation on surrounding work and the environment. |
 |
System Components
- 40,000 PSI Pump offers higher production rates, lower water consumption, and higher nozzle
velocities. Achieves better surface cleanliness and contamination removal.
- JetTracTM crawler is vacuum attached, self propelled and remotely operated. Can maneuver over
irregular and curved surfaces without the use of scaffolding or man lifts.
- Vacuum skid offers a powerful 27" of Hg to provide 100% containment at the nozzle. This
vacuum holds JetTrac to the surface and removes water and debris.
- Water filter system is a simple recovery system designed to fit any need from simple solids/water
separation to removal of hazardous solids leaving the effluent water non-hazardous.
Benefits of the JetTracTM System
- Higher Production rates on both vertical and horizontal surfaces.
- 100% containment at the nozzle reducing cleanup times and flash rusting.
- Less interference with other maintenance activities.
- Reduced setup requirements - eliminates scaffolding, man lifts, and crane service.
- Minimal environmental impact - no airborne or ground contamination.
- Painting can begin immediately, providing quicker completion times.
- Eliminates containment cost.
- Lower waste disposal costs.
|
|
|
